Roller Brake Testing: What HGV and PSV Operators Need to Know About Compliance

Understanding roller brake testing, DVSA requirements and the importance of maintaining accurate brake test records.

An effective vehicle maintenance system is one of the most important responsibilities of an operator licence holder. Ensuring that vehicles remain safe, roadworthy and compliant involves more than simply completing regular preventative maintenance inspections (PMIs). Operators must also be able to demonstrate that braking systems are being properly assessed and that appropriate records are maintained.

Roller brake testing (RBT) plays an important role in this process, providing measurable evidence of a vehicle’s braking performance and helping operators identify potential defects before they become a serious safety concern.

But what exactly should operators be doing, what does the DVSA expect, and what information should be included on a roller brake test printout?

1. Why is roller brake testing important?

The braking system is one of the most safety-critical components of any commercial vehicle.

A vehicle may appear to have satisfactory brakes during a routine visual inspection, but this does not necessarily mean that the braking system is performing effectively.

Roller brake testing provides an objective assessment of braking performance, allowing individual wheel and axle results to be measured and compared.

It can help identify:

  • Poor or uneven braking performance.
  • Excessive braking imbalance between wheels on the same axle.
  • Underperforming or ineffective brakes.
  • Defects with the service or parking brake.
  • Potential issues with brake adjustment or braking components.
  • Changes in braking performance over time.

For operators, roller brake testing is not simply a workshop exercise. It forms part of the evidence needed to demonstrate that vehicles are being maintained in a safe and roadworthy condition.

2. What does the DVSA expect from operators?

The DVSA’s Guide to Maintaining Roadworthiness sets out expectations for operators regarding brake performance assessments.

From April 2025, the guidance strengthened the expectation that a brake performance assessment should form part of every safety inspection.

A laden roller brake test is the preferred method of assessment, where practicable.

Ideally, vehicles should be presented for testing at 65% or more of their design axle weight to provide a meaningful assessment of braking performance.

Where this cannot be achieved, operators should ensure that an appropriate alternative assessment method is used and that the reasons and supporting evidence are properly documented.

It is important to understand that simply arranging an occasional roller brake test is not necessarily sufficient. Operators need to demonstrate that brake performance is being assessed as part of an effective, planned vehicle maintenance system.

3. What information must be included on a roller brake test printout?

One of the common compliance issues identified during maintenance audits is the absence of complete roller brake test documentation.

Operators should ensure that they obtain and retain the full brake test report rather than relying solely on a pass certificate or a brief summary.

The report should provide sufficient information to demonstrate what was tested and the results achieved.

As a minimum, operators should look for the following information:

Vehicle and test identification

  • Vehicle registration number.
  • Date of the test.
  • Vehicle mileage, where recorded.
  • Test station details.
  • Test equipment identification, where available.
  • Details of the testing provider.

Brake performance results

  • Individual wheel braking forces.
  • Axle-by-axle braking results.
  • Left-to-right braking imbalance.
  • Service brake performance.
  • Parking brake performance.
  • Overall brake efficiency, where calculated.
  • Any recorded warnings, defects or abnormal results.

Additional test information

  • Vehicle loading or axle weight information.
  • Whether the test was carried out laden or unladen.
  • Test outcome.
  • Any comments or observations made by the tester.

The exact layout and information displayed will vary depending on the testing equipment and provider. However, the operator must have sufficient information to assess and evidence the vehicle’s braking performance.

4. Why is the full printout so important?

A pass certificate on its own does not provide the same level of evidence as a full roller brake test report.

The full printout allows the operator, Transport Manager and maintenance provider to review the actual braking forces recorded during the test.

For example, a vehicle may receive an overall satisfactory result, but the individual axle results could highlight developing braking imbalance or other issues requiring investigation.

Without the detailed results, it becomes much more difficult to demonstrate that braking performance has been properly assessed and that any developing problems have been identified.

During a DVSA investigation, maintenance audit or Public Inquiry, the Traffic Commissioner may expect operators to demonstrate that appropriate brake performance assessments have been completed and that any identified issues have been addressed.

5. What happens if a vehicle fails its roller brake test?

Any unsatisfactory result or identified braking defect must be investigated.

Operators should ensure that:

  1. The defect or unsatisfactory result is recorded.
  2. The vehicle is assessed to establish whether it is safe and roadworthy.
  3. Any necessary repairs are completed before the vehicle returns to service where the defect affects roadworthiness.
  4. Repair records and supporting invoices are retained.
  5. A further brake test is arranged where appropriate to confirm satisfactory performance.

A vehicle should never be returned to service simply because a test has been completed. The operator must be satisfied that any safety-related defects have been properly rectified.

The original failed test report should also be retained alongside the subsequent repair documentation and any retest results. This provides an audit trail demonstrating that the issue was identified, investigated and resolved.

6. Where should roller brake test records be kept?

All roller brake test documentation should form part of the vehicle’s maintenance records.

Operators should ensure that:

  • Full brake test reports are retained against the relevant vehicle.
  • Reports can be linked to the corresponding safety inspection.
  • Any defects identified are recorded and addressed.
  • Repair documentation is retained.
  • Retest reports are available where applicable.
  • Records are readily accessible for DVSA inspection.

Brake test reports should also be reviewed by the Transport Manager as part of the operator’s ongoing maintenance monitoring arrangements.

It is not enough to simply file the paperwork away. The results should be reviewed to identify any recurring problems or deterioration in braking performance.

7. Common roller brake testing compliance mistakes

During compliance reviews, operators should pay particular attention to the following potential weaknesses:

Common issueWhy it matters
Only retaining a pass certificateDoes not provide the detailed braking results
Missing brake test reportsLeaves gaps in the vehicle maintenance evidence
No brake performance assessment at a safety inspectionMay not meet DVSA guidance expectations
Testing only unladen without justificationMay not provide a representative assessment
Failing to investigate poor resultsCould allow defects to remain unresolved
No evidence of remedial workMakes it difficult to demonstrate that defects were rectified
Reports not linked to safety inspectionsCreates gaps in the maintenance audit trail

These issues can indicate weaknesses in an operator’s preventative maintenance system and may attract attention during a DVSA investigation or compliance audit.

8. Transport Manager and Operator responsibilities

The responsibility for vehicle maintenance ultimately rests with the operator licence holder. However, the Transport Manager has an important role in ensuring that effective systems are in place.

Transport Managers should regularly check that:

  • Brake performance assessments are included within the safety inspection programme.
  • Maintenance providers understand the operator’s brake testing requirements.
  • Full roller brake test reports are being supplied.
  • Results are reviewed and any concerns investigated.
  • Defects and remedial work are properly documented.
  • Records are maintained and available for inspection.

These checks should form part of the Transport Manager’s routine compliance monitoring activities.

9. Our advice: Review your roller brake testing arrangements

Roller brake testing is an important part of demonstrating effective vehicle maintenance and compliance with your Operator Licence undertakings.

Operators should not assume that their maintenance provider is automatically supplying all the information they need. It is important to check that the correct assessments are being carried out and that full reports are being received and retained.

We recommend reviewing your current arrangements to ensure that every safety inspection includes an appropriate brake performance assessment, that the full results are recorded and that any issues are followed through to completion.

Need help reviewing your vehicle maintenance and brake testing compliance?

At The Transport Consultancy, we support HGV and PSV operators with transport compliance, independent compliance audits, vehicle maintenance reviews and ongoing Transport Manager support.

We can review your existing maintenance arrangements, identify gaps in your compliance systems and provide practical recommendations to help ensure your business meets its Operator Licence obligations.

Contact The Transport Consultancy

Website: www.thetc.co.uk

Email: info@thetc.co.uk

Telephone: 01788 891608 or 07554 779768

Keeping your vehicles roadworthy is not just about passing an inspection. It is about having the right systems, evidence and management controls in place to demonstrate ongoing compliance.

Scroll to Top